Need help setting up enterprise

General discussion about WFilter ICF features, problems, configuration issues etc.

Moderators: imfirewall, gengw2000

ROSS24
Posts: 7
Joined: Wed Mar 04, 2015 9:19 am

Need help setting up enterprise

Postby ROSS24 » Wed Mar 04, 2015 9:46 pm

Just bought this last week and i am only looking to block

torrenting.I appreciate any help, thanks in advance.

imfirewall
Posts: 153
Joined: Fri Nov 26, 2010 7:41 am

Need help setting up enterprise

Postby imfirewall » Thu Mar 05, 2015 3:04 am

According to my experience, most new users will have deployment

issue. Please check the online document for deployment issues if required:



http://www.imfirewall.us/support/WFilter_4_1/Doc/deployment_example.htm



If it's not helpful, please describe me your network topology,

together with switch/router models. So I can work out a solution for you.

ROSS24
Posts: 7
Joined: Wed Mar 04, 2015 9:19 am

Need help setting up enterprise

Postby ROSS24 » Thu Mar 05, 2015 8:04 am

Asus rt-ac66u router connected to cable modem.

3 pc's wired, 1 wireless.

imfirewall
Posts: 153
Joined: Fri Nov 26, 2010 7:41 am

Need help setting up enterprise

Postby imfirewall » Fri Mar 06, 2015 2:43 am



Your router can not support pass-by deployment.



To deploy WFilter, you need to setup your pc as the gateway, and make your wifi works in AP mode.



Please check: http://www.imfirewall.us/support/WFilter_4_1/Doc/deploy_wireless_gateway.htm

ROSS24
Posts: 7
Joined: Wed Mar 04, 2015 9:19 am

Need help setting up enterprise

Postby ROSS24 » Sat Mar 07, 2015 9:26 pm

When i get my second card. will let you know what happens, thanks.

ROSS24
Posts: 7
Joined: Wed Mar 04, 2015 9:19 am

Need help setting up enterprise

Postby ROSS24 » Thu Mar 12, 2015 3:11 am

Got the 2nd card, what i understand so far is this.

Connect cable modem direct to main pc.

then connect one of the cards to router

here's where i'm stuck cannot enter router interface

imfirewall
Posts: 153
Joined: Fri Nov 26, 2010 7:41 am

Need help setting up enterprise

Postby imfirewall » Thu Mar 19, 2015 3:42 am





yes, it's "modem <-> pc <-> (wan port)router".



Because your pc is in the wan side of your router, you can not access router's web UI. You can use a wireless device to access your router.

ROSS24
Posts: 7
Joined: Wed Mar 04, 2015 9:19 am

Need help setting up enterprise

Postby ROSS24 » Thu Mar 19, 2015 10:11 am

Will be adding a managed switch to this setup, getting rid of the other card

Have the switch, waiting on cat5 's to arrive

ROSS24
Posts: 7
Joined: Wed Mar 04, 2015 9:19 am

Need help setting up enterprise

Postby ROSS24 » Thu Apr 02, 2015 10:42 pm

I setup the switch,and port mirror, still cannot monitor other computers

Attached files

imfirewall
Posts: 153
Joined: Fri Nov 26, 2010 7:41 am

Need help setting up enterprise

Postby imfirewall » Fri Apr 03, 2015 2:38 am



Please describe me your network topology, and a screenshot of port mirroring settings.


Return to “WFilter ICF”

Who is online

Users browsing this forum: No registered users and 15 guests