Port mirroring settings question for WFilter.

General discussion about WFilter ICF features, problems, configuration issues etc.

Moderators: imfirewall, gengw2000

Joe
Posts: 6
Joined: Thu Feb 04, 2010 7:43 pm

Port mirroring settings question for WFilter.

Postby Joe » Mon May 10, 2010 6:59 pm

If I have a network setup as depicted below and I want to mirror the network devices. I’m I correct by saying all I have to do is setup the mirror switch to mirror it’s ports? No configuration is required on the switch directly connected to the computers?





Attached files

admin
Site Admin
Posts: 137
Joined: Wed Nov 23, 2016 12:08 pm

Port mirroring settings question for WFilter.

Postby admin » Mon May 10, 2010 7:10 pm

All you need to do is to setup a mirroring port in the first switch.

And you don't need to mirror all ports, only the internet port shall be mirrored. No configuration is required on the workstations.



Please check these deployment examples: http://www.imfirewall.us/help/doc/deployment_example.htm


Return to “WFilter ICF”

Who is online

Users browsing this forum: No registered users and 5 guests