currently WFilter only records 11 or 12 PC's of 75 configured
Moderators: imfirewall, gengw2000
currently WFilter only records 11 or 12 PC's of 75 configured
WFilter only records 11 or 12 PC's of 75 configured. Please advice.
currently WFilter only records 11 or 12 PC's of 75 configured
Please check following steps:
1. Check "Control Settings"->"User-computer table", to make sure every computers "Enable Monitoring" is enabled. By default, it only checks 8 computers.
2. If your network is multi-segments, please use "By IP Address" monitoring mode in "System Settings"->"Monitoring Settings". Otherwise, WFilter only monitors gateways for each subnet.
3. Check "IP Segments" settings in "System Settings"->"Monitoring Settings", to make sure every subnet is configured.
4. Check your network topology to make sure no computer bypass the monitoring switch.
1. Check "Control Settings"->"User-computer table", to make sure every computers "Enable Monitoring" is enabled. By default, it only checks 8 computers.
2. If your network is multi-segments, please use "By IP Address" monitoring mode in "System Settings"->"Monitoring Settings". Otherwise, WFilter only monitors gateways for each subnet.
3. Check "IP Segments" settings in "System Settings"->"Monitoring Settings", to make sure every subnet is configured.
4. Check your network topology to make sure no computer bypass the monitoring switch.
Who is online
Users browsing this forum: No registered users and 34 guests