We have a Cisco 2900S switch. I have enabled the SPAN port and connected the Wfilter machine NIC to that port. I can monitor the devices connected to the network now but I cannot see the wfilter machine remotely.
Is there some configuration I need to do on the NIC or do I require a second Nic?
Can not remote access WFilter with cisco switch 2900S
Moderators: imfirewall, gengw2000
Can not remote access WFilter with cisco switch 2900S
Cisco switch does not allow outgoing traffic on the mirroring port by default.
To make WFilter remote access and blocking feature work, you have two solutions:
1. Enable the "ingress" parameter to allow outgoing traffic on the mirroring port. However, this is only supported by some cisco switches. I am not sure the 2900S supports it. You need to check the cisco manual.
Also please check the WFilter deployment of cisco 2950 for more details: cisco 2950 deployment
2. Add a secondary NIC. This solution is more simple. Using a secondary NIC is recommended when you're monitoring more than 100 computers, even the switch allowes outgoing traffic in the mirroring port.
To make WFilter remote access and blocking feature work, you have two solutions:
1. Enable the "ingress" parameter to allow outgoing traffic on the mirroring port. However, this is only supported by some cisco switches. I am not sure the 2900S supports it. You need to check the cisco manual.
Also please check the WFilter deployment of cisco 2950 for more details: cisco 2950 deployment
2. Add a secondary NIC. This solution is more simple. Using a secondary NIC is recommended when you're monitoring more than 100 computers, even the switch allowes outgoing traffic in the mirroring port.
IMFirewall Software provides solutions for web content filtering software, business internet filtering software, business internet usage monitoring software.
Who is online
Users browsing this forum: No registered users and 12 guests