If I have a network setup as depicted below and I want to mirror the network devices. I’m I correct by saying all I have to do is setup the mirror switch to mirror it’s ports? No configuration is required on the switch directly connected to the computers?
Port mirroring settings question for WFilter.
Posted: Mon May 10, 2010 7:10 pm
by admin
All you need to do is to setup a mirroring port in the first switch.
And you don't need to mirror all ports, only the internet port shall be mirrored. No configuration is required on the workstations.
Please check these deployment examples: http://www.imfirewall.us/help/doc/deployment_example.htm