Can you provide me some examples for "IPSegments Settings" of WFilter?

General discussion about WFilter ICF features, problems, configuration issues etc.

Moderators: imfirewall, gengw2000

Lek2010
Posts: 4
Joined: Sat Dec 04, 2010 4:41 am

Can you provide me some examples for "IPSegments Settings" of WFilter?

Postby Lek2010 » Thu Dec 09, 2010 2:00 am

I am not sure how to configure the ip segments. Please give me some examples.

gengw2000
Posts: 281
Joined: Mon Sep 07, 2009 11:11 pm

Can you provide me some examples for "IPSegments Settings" of WFilter?

Postby gengw2000 » Thu Dec 09, 2010 2:17 am

Lek2010 wrote: I am not sure how to configure the ip segments. Please give me some examples.



The "IPSegments Settings" is expressed in CIDR notation.



It is written as the first address of a network followed by the bit-length of the prefix, separated by a slash (/) character.



For example,

1. "192.168.1.0/24" means subnet "192.168.1.0" with mask 255.255.255.0.

2. "192.168.0.0/16" means subnet "192.168.0.0" with mask 255.255.0.0.



If you have multiple segments to be monitored, seperate each segment with ",", for example: "192.168.1.0/24,192.168.2.0/24".



If you're not sure how to configure it, you also can leave it as blank. WFilter will retrieve the ip segments from the monitoring adapter.






Return to “WFilter ICF”

Who is online

Users browsing this forum: No registered users and 26 guests