Mirroring and not able to see wifi traffic

[bhughes10]

I purchased a Cisco RV 110W modem with morroring to use with wFilter and with this option turned on I can see another user traffic plugged into the router but I'm unable to see wifi users traffic. Is this a normal thing?



Thanks,

[gengw2000]

Wifi users can also be monitored by WFilter. This is related to your port mirroring settings.



Can you post a screenshot of your port mirroring settings for us to check?



And what are the ip address ranges of wifi users and wired users?

[bhughes10]

Sure, here's what I have set. I'm plugged into port 1

The IP Address are 192.158.1.100 Wired

101 Wired

102 Wifi

103 wifi

104 wired... Using dhcp so they just get the next avavilable.

Attached files

[gengw2000]

No problem with your port mirroring settings.



How do you configure WFilter "IP Segments" settings?



Please check and set it to "192.158.1.0/24" to make a try.

[bhughes10]

Thanks for the suggestion but It's in there. It's actually 192.168.1.0/24 I fat fingered the number the first time I posted. I'm still not seeing and wifi traffic. I'm thinking it's the router some how.



Brad

[gengw2000]

But in your previous post, you mentioned the ip address is "192.158", not "192.168". Is it a spell mistake?



We need a packet dump to diagnose this issue, please follow below steps:

1. In "Help"->"Support", click "Add packet dump file(s)".

2. Choose "for target computer only", and input a wifi computer's ip address, then "Restart Capturing".

3. Access 1-2 webpages in the wifi computer.

4. Click "Stop" in "Help"->"Support", then download the "IMSupport.zip" file.

5. Upload this "IMSupport.zip" or send this file to support@imfirewall.us for us to check.