currently WFilter only records 11 or 12 PC's of 75 configured

General discussion about WFilter ICF features, problems, configuration issues etc.

Moderators: imfirewall, gengw2000

clopez
Posts: 1
Joined: Mon Jul 12, 2010 7:37 pm

currently WFilter only records 11 or 12 PC's of 75 configured

Postby clopez » Mon Jul 12, 2010 7:39 pm

WFilter only records 11 or 12 PC's of 75 configured. Please advice.

admin
Site Admin
Posts: 137
Joined: Wed Nov 23, 2016 12:08 pm

currently WFilter only records 11 or 12 PC's of 75 configured

Postby admin » Mon Jul 12, 2010 7:42 pm

Please check following steps:



1. Check "Control Settings"->"User-computer table", to make sure every computers "Enable Monitoring" is enabled. By default, it only checks 8 computers.



2. If your network is multi-segments, please use "By IP Address" monitoring mode in "System Settings"->"Monitoring Settings". Otherwise, WFilter only monitors gateways for each subnet.



3. Check "IP Segments" settings in "System Settings"->"Monitoring Settings", to make sure every subnet is configured.



4. Check your network topology to make sure no computer bypass the monitoring switch.


Return to “WFilter ICF”

Who is online

Users browsing this forum: No registered users and 28 guests