We have Win XP Prof and Win7 32 and 64 bit prof, each client is assigned IP address by a DHCP. When I Go to Statistics & Reports--> Detail Reports-->Web Report Tab, under the first drop down box choose Selected Users and click the button Choose Users I pick my name then choose Last Month and for report type: Web Surfing Details and click Run Report and got the report!
The problem is I can only see web surfing details data for two days.
I know this detail report is wrong I was here from June 3 to 7 Vacation 10 to 14 back the 17 for good, what is wrong? To many missing days??
Incomplete web surfing details report
Moderators: imfirewall, gengw2000
-
imfirewall
- Posts: 153
- Joined: Fri Nov 26, 2010 7:41 am
Incomplete web surfing details report
I doubt you're using "by ip address" mode of WFilter. In "by ip address" mode, WFilter identifies users by ip addresses. It is possible that you were assigned by other ip addresses for the missing days.
Please check this document: http://www.imfirewall.us/support/WFilter_4_0/Doc/WFilter_identify_users.htm
If your network is single segment with DHCP, you'd better use "by mac address" mode. Or change the DHCP settings to provide static ip address to each mac address.
Please check this document: http://www.imfirewall.us/support/WFilter_4_0/Doc/WFilter_identify_users.htm
If your network is single segment with DHCP, you'd better use "by mac address" mode. Or change the DHCP settings to provide static ip address to each mac address.
Incomplete web surfing details report
Our Network is a multi-segments, your manual recommends in a multi-segments network use "By IP Address" see below.
Monitoring Mode:
1. Using "By MAC Address" mode, WFilter will identify a computer by its MAC address. It is recommended in single segment networks. However, in a multi-segments network, you need to use "By IP Address" mode because MAC addresses can not be retrieved behind a router.
2. Using "By IP Address" mode, WFilter will identify a computer by its IP address.
Monitoring Mode:
1. Using "By MAC Address" mode, WFilter will identify a computer by its MAC address. It is recommended in single segment networks. However, in a multi-segments network, you need to use "By IP Address" mode because MAC addresses can not be retrieved behind a router.
2. Using "By IP Address" mode, WFilter will identify a computer by its IP address.
-
imfirewall
- Posts: 153
- Joined: Fri Nov 26, 2010 7:41 am
Incomplete web surfing details report
In "by ip address" mode, data and name are bound to ip address. You shall have other solutions to fix the ip addresses. Otherwise, the history data will be mixed up.
Three solutions avaiable:
1. Use static ip address.
2. Modify the dhcp server settings to provide static ip address for each mac address.
3. Enable "account monitoring" and monitor by ad users.
Please check this document: http://www.imfirewall.us/support/WFilter_4_0/Doc/WFilter_identify_users.htm
Three solutions avaiable:
1. Use static ip address.
2. Modify the dhcp server settings to provide static ip address for each mac address.
3. Enable "account monitoring" and monitor by ad users.
Please check this document: http://www.imfirewall.us/support/WFilter_4_0/Doc/WFilter_identify_users.htm
Who is online
Users browsing this forum: No registered users and 16 guests